Milliput

Milliput 04 Black Milliput

Black Milliput - Image 1
Gyártó: Milliput
Termékkód: MPT04
Elérhetőség: kapható!
3790 Ft vagy 6600 pont

27% ÁFA-t tartalmaz
országba történő szállításkor: Magyarország
Az ország megváltoztatásához kattintson ide

Alapinformációk

GyártóMilliput
TermékkódMPT04
Súly:0.12 kg
Ean:5035167005372
113g
Hozzáadva a katalógushoz:17.12.2015
Címkék:Epoxy-Putty

Black Milliput (113,4 g)

Black Milliput is the most recent addition to our range of products. Ideal if you want to match a black surface without painting it afterwards. Once cured the beauty of Milliput is that it can be drilled, filed and sanded while still retaining its adhesive properties and bonding strength. Recommend products: Standard Milliput, Epoxy Putty Quick Dry and BROWN Stuff Kneadatite 15cm (6inches).

Typical applications:

  • Repair of antique clocks
  • Guttering
  • Ebonised wood
  • Marble
  • Slate
  • Cast Iron
  • Basalt ceramics
  • Black plastic parts
  • Automotive applications
  • Jewellery making

Using Milliput - A two part epoxy putty

Milliput is the trade name for our epoxy putty. We produce five grades: Standard (Yellow/Grey), Terracotta, Silver Grey, Black and Superfine White. Each grade is presented in similar packs containing 2 x 56,7gm. sticks and the general instructions for preparation and usage are the same.

Once equal quantities of each stick have been mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25 deg C) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced.

After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted.

Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive. Milliput will set under water and is heat resistant up to 130°C.

Mix together equal parts of each stick from the pack. Knead and roll in the hands for at least 5 minutes until the colours merge and become uniform and no streaks can be seen, and then mix for another minute. The surfaces to which the putty is applied should be free from grease and dirt. Smooth surfaces should be cleaned with a suitable solvent or with soap and warm water to remove dirt and grease. Abrading the surface will improve adhesion. the putty may now be applied and will set hard in three to four hours without shrinking.

At all stages from initial mixing to final setting Milliput responds to the use of water. To aid manipulation and avoid sticking, fingers and tools should be kept moistened with water. There are certain instances when work may be carried out in a gentle stream of water under a tap. To obtain a smooth finish, mould or apply Milliput and then immediately wipe and smooth gently with wet finger or with a fine textured moist cloth.

When tools have been used for applying or contouring Milliput they should be cleaned immediately after use. If the putty is allowed to harden on it will be almost impossible to remove.

In the putty state Milliput, like most chemicals in domestic use, may cause irritation to sensitive skins. When mixing the two components it is advisable to use rubber gloves or throw-away polythene gloves. When rubber gloves have been used wash them immediately after use, and whilst still on the hands, using running water. If the hands have been used for mixing or manipulating Milliput wash them immediately after use with toilet soap and warm water.

When casting or mouldmaking talc or a light oil can be used as a releasing agent.

Milliput products are resistant to frost, heat, solvents and most fuels.

Colouring Milliput

There are a number of ways of colouring Milliput.

Different colours can be obtain by cross-mixing or blending from the range of colours that Milliput is available in.

Powder pigment can be mixed in, in small quantities, so that the mixture does not become too dry and crumbly. Strong powder pigment rather than powder paint is better as smaller amounts can be used.

Liquid colourings, like enamel paints, oil paints, spirit based-dyes or pigments can also be used to colour Milliput, but liquids or pastes may be difficult to introduce into the putty, again small quantities should be used, to avoid creating a very wet mix that may be difficult to mix.

In all cases the Milliput should be thoroughly mixed by rolling & folding about 30-35 times. This will ensure that all the hardener has come in good contact with the resin and the Milliput will then set correctly.

Hiba a leírásban? Jelezd számunkra
Ügyfeleink véleménye
Vélemény hozzáadása: Black Milliput
...
Hozzáadva a katalógushoz: 17.12.2015
Elérhetőség: kapható!
  • elérhető termék
  • nem elérhető termék
  • a termék megrendelésre kapható
  • szállítmány
  • nincs
  • 1 darab
  • 2 darab
  • 3-5 darab
  • 6-10 darab
  • feljebb 10 darab
Beszerezhetünk olyan terméket, mely nincs fent a honlapon vagy nem elérhető?
Hasonló termékek

Gyártó: Milliput
Termékkód: MPT05
Elérhetőség: kapható!

4438 Ft vagy 7700 pont

Gyártó: Milliput
Termékkód: MPT01
Elérhetőség: kapható!

2617 Ft vagy 4500 pont

Gyártó: Milliput
Termékkód: MPT06
Elérhetőség: kapható!

4650 Ft vagy 8000 pont

Gyártó: Milliput
Termékkód: MPT03
Elérhetőség: kapható!

3558 Ft vagy 6200 pont

Gyártó: Milliput
Termékkód: MPT02
Elérhetőség: 2-6 hét

2132 Ft vagy 3700 pont

Gyártó: Green Stuff World
Termékkód: GSW9004
Elérhetőség: kapható!

2314 Ft vagy 4000 pont

Gyártó: Green Stuff World
Termékkód: GSW9002
Elérhetőség: kapható!

4397 Ft vagy 7600 pont

Gyártó: Green Stuff World
Termékkód: GSW9003
Elérhetőség: kapható!

3234 Ft vagy 5600 pont

Gyártó: Tamiya
Termékkód: tam87145
Elérhetőség: kapható!

8407 Ft vagy 13900 pont

Gyártó: Tamiya
Termékkód: tam87143
Elérhetőség: kapható!

8248 Ft vagy 13600 pont

Gyártó: Tamiya
Termékkód: tam87051
Elérhetőség: kapható!

2525 Ft vagy 4200 pont

Gyártó: Tamiya
Termékkód: tam87052
Elérhetőség: kapható!

2494 Ft vagy 4100 pont